32.520 mhz
33.020 mhz
33.520 mhz
Suppliers:
Load Capacitance:
The load capacitance of FT-101E crystals is not specified in the FT-101E service manual. However, it is typically between 15 and 50 picofarads (pF). The load capacitance is the capacitance that is seen by the crystal when it is installed in a circuit. It is important to match the load capacitance of the crystal to the input capacitance of the circuit in order to get the best performance from the crystal. If the load capacitance is too high, the crystal will not oscillate properly. If the load capacitance is too low, the crystal will not be able to provide enough signal to the circuit.
The load capacitance of a crystal can be measured using a crystal tester. A crystal tester is a device that measures the frequency, resistance, and capacitance of a crystal. The load capacitance of a crystal can also be calculated using the following formula:
CL = (C1 * C2) / (C1 + C2)
where CL is the load capacitance, C1 is the input capacitance of the circuit, and C2 is the capacitance of the crystal.
The load capacitance of a crystal is an important parameter to consider when selecting a crystal for a circuit. By matching the load capacitance of the crystal to the input capacitance of the circuit, you can ensure that the crystal will oscillate properly and provide enough signal to the circuit.
